Replacement Note: Before sliding the rear panel back onto the carrier, make sure the top lip of the panel engages with the top edge of the drive carrier. (Figure 13)
Warning: Be careful not to pinch the power cable between the panel and the carrier.
Figure 13
7. Reinstall the front hard drive carrier as follows.
Replacement Note: Align the center mounting peg on the top of the carrier with the center channel on the underside of the optical drive shelf. This center peg helps to guide the carrier. Then align the two remaining pegs, and slide the carrier in until the pegs engage and the right side lever clicks into place. (Figure 14)
Figure 14
Power Mac G4 (Mirrored Drive Doors/FW 800) Front Panel Board Cable - 9
