Chapter 2 Assembling Your Multitrack Project 25
To move a clip on a track:
mDrag the clip left or right on the track, or up or down to another track.
To change the length of a clip:
mPlace the pointer at the edge of the clip and then drag it left or right.
To delete a clip:
mSelect the clip, then press Delete.
The clip disappears from the track.
To cut a clip into several segments:
1Select the Blade tool in the Toolbar.
The arrow pointer becomes a blade to indicate that you’re cutting, not selecting, the clip.
2Position the blade pointer over the clip you want to cut, then click.
Each time you click, the clip is cut.
When you’re done cutting the clip, you can select the Selection tool to move, resize, or
delete any leftover bits of the clip that you don’t need.
You can also cut all the clips in a project.
You know you can change
the length of a clip when
the resize pointer replaces
the pointer.