Apple 5-inch flat panel monitor

Using Your Display Stands 25

Attaching the Flip-Out Stand

1If necessary, remove the desktop stand.

For instructions, see “Removing the Desktop Stand” on page 22.

2Hook the three plastic tabs on the top cover of the ﬂip-out stand into the three openings on

the back center area of the display.

3Place the bottom part of the cover against the display and screw in the two plastic

thumbscrews.

Use a coin or ﬂathead screwdriver to tighten the screws. Don’t overtighten the screws; you

might strip the threads.

4Flip out the stand and place the display with the stand on a ﬂat surface, such as a table or

desk.

5Connect the DVI and USB cables to the computer.

6Connect the keyboard and mouse to the USB ports on the display, if desired.

7If desired, attach a locking cable to the security slot on the back of the display.

8Plug in the monitor’s power cord.

Removing the Flip-Out Stand

1Place a towel or cloth on a clean, ﬂat surface to protect the display once it’s removed from

the stand.

2Choose Shut Down from the Special menu to turn off your computer and monitor.

3If necessary, lift the display up slightly and press the power button (®) to turn the display

off.

First, hook the

flip-out stand

onto the back

of the display.

Then, tighten

the thumbscrews.