13 Press the reset button on the logic board. Then gently but firmly push the board back into place within the computer. You will need to push a little harder at the end to make sure the connectors at the back of the board are seated in their slot.
Note: If you can’t find the reset button, it may be in a different location on your logic board. Check the manual that came with your computer, in the section in the appendix about installing expansion cards. An illustration there shows where the reset button is for your computer.
1 Press the reset button.
2 Gently but
firmly push on the vertical plate until the logic board is solidly back in place.
14 | Chapter 1 |
