ELITE SERIES USER MANUAL | CP/M ENHANCEMENTS |
The enhanced CP/M master is already in the drive in response to COPY’s request for it, SO just hit:
<ESC>
CP/M will finally respond with its “A>.
At this point in the procedure you have created a diskette which will boot correctly (up to a point) on your higher capacity drive in a higher capacity way, but the CP/M system which is on the diskette for that drive still thinks that your drive is a Disk ][. This is because the system you copied (the one on the enhanced master diskette) was still treating drive A: as a Disk ][. To remedy this problem, get back into PROFILE by typing:
PROFILE<RETURN>
Again, the utility will “sign on” with:
Apple ][ CP/M
Drive Configuration Utility
Copyright (c) (p) 1982 RANA Systems
Version 1.1
*
To change the setting for drive A: within that system sitting on your higher capacity diskette, type (without <RETURN>):
B:=A:
Page