ELITE SERIES USER MANUAL | CP/M ENHANCEMENTS |
What you’ve told PROFILE so far is that you are interested in updating the CP/M system in drive
B:“B:=”) (with the help of SGLDRIVE), and the change you wish to make is to drive A: (“A:). However, you’ve yet to specify the change to be made. Remember that drive type number you used back in FORMAT and PROFILE? It’s time to type that again.
Example: If your drive is an Elite Two (in which
case phoney drive B: would be defined as an Elite Two right now), you would want to type:
B:=A:2
If your drive is an Elite One, type:
B:=A:1
and last, but certainly not least (by about 500,000 bytes of storage), an Elite Three would be:
B:=A:3
Once you’ve entered the drive type number, press:
<RETURN>
and PROFILE will respond with (again):
Insert a system disk in B: <RETURN> to continue/retry; <ESC> or
Page