ELITE SERIES USER MANUAL

DOS ENHANCEMENTS

task, considering the vivid imagination of many users.

These instructions have been written in a step- by—step manner, with some explanation of what is being done at each step. All of these instruc— tions have been tested at Rana to confirm that they are correct. In addition, several “early release” and later users also confirmed the accuracy of these instructions. Therefore, there is no reason for you not having complete success following these instructions. That is, if’ you follow the instructions completely, step by step. You are encouraged to read these instructions completely, all the way through, before starting the procedure. That way you will have a general understanding of what all is involved before “diving in”.

The first thing to do is to “digup” your DOS 3.3 master diskette which has Apple’s MASTER CREATE utility on it. (If you’re a CP/M or Pascal user, you’ll find your DOS diskettes buried in the bottom left hand corner of the closet, on top of the DOS 3.2.1 diskettes.)

These instructions are going to assume that you have your (first) controller card in slot six, and your (first) drive attached as drive one (you won’t get very far having your only drive connected as drive’ two). If your drive is not connected in this manner, and you are not an old hand at using Apple DOS, then you should probably rearrange your system into this configuration for the duration of the enhancing proced- ure.

Page 3—3