ELITE SERIES USER MANUAL

DOS ENHANCEMENTS

Type:

<RETURN>

and FORMAT will read in the DOS image from that diskette.

After the image is in memory, FORMAT will ask:

SLOT NUMBER (1-7)? 6

FORMAT is asking for the slot number of the drive to be used for formatting. Just like PROFILE, FORMAT has “pre—loaded” the message with the default response. Since the default is correct, type:

<RETURN>

And FORMAT will ask:

DRIVE NUMBER (1-4)? 2

This time FORMAT got the wrong default. FORMAT assumes that it was run from a drive containing a system diskette, so it must be the “other” drive which you wish to use for formatting. Since you will want to use the first drive (one), type (without <RETURN>):

1

Page 3 — 2 3