ELITE SERIES USER MANUAL

DOS ENHANCEMENTS

To update the diskette, type:

<RETURN>

and PROFILE will over-write the old enhanced DOS with the new one.

When it’s finished, it will return to the menu:

ENTER SELECTION (0-3)

1)LOAD NEW DOS IMAGE FROM DISK

2)CHANGE CURRENT DOS IMAGE SETTING

3)SAVE CURRENT DOS IMAGE TO DISK

0)TERMINATE PROFILE

Since you are finished with PROFILE for the time being, type (without <RETURN>):

0

and PROFILE will terminate after saying:

THIS UTILITY DOES NOT APPLY YOUR CHANGES TO THE CURRENTLY OPERATING DOS IMAGE, SO YOU WILL NEED TO BOOT THE DISKETTE TO WHICH YOU SAVED YOUR CHANGES IN ORDER TO USE THE NEW CONFIGURATION.

This is a reminder that the (in-memory) (current operating) DOS has not been altered. Don’t follow PROFILE’S instructions! This newly configured diskette probably won’t boot correctly. Following the termination message, the BASIC prompt will appear.

Page 3—21