ELITE SERIES USER MANUAL | CP/M ENHANCEMENTS |
by typing
The next step is to create a system diskette which gives you the full storage capability of the drive you will be using as drive A:. If you will be using a Disk ][ as drive A:, then you can simply read through all the steps up to the rebooting of the system. Continue following the instructions right after the point where the system is rebooted.
The first step in creating a system diskette for your higher capacity Elite drive is to format a diskette for the drive to use when it starts operating in a higher capacity way. Since you now have an enhanced CP/M, you can now run the new FORMAT utility in order to create these higher capacity diskettes. To get the new FORMAT started, type:
FORMAT<RETURN>
Once CP/M loads it in, FORMAT will respond with:
Page