Troubleshooting Symptom Charts/CD-ROM Drive - 36
ejects properly. (
Note:
Be sure to push the CD carrier in all
the way before testing; if the CD device is not properly
seated, the problem may recur.) If the tray still does not
eject properly, install an additional bumper on each side,
stacking them on top of the bumpers you previously installed,
and test again. You may need to install up to three bumpers on
each side before the tray ejects properly. (Graphic follows on
the next page.)
2 Install a CD bezel shim (part number 922-3911) on the
back of the CD bezel on the eject button arm. (Graphic follows
on the next page.) You may need to use a combination of
bumpers and shim before the CD-ROM tray ejects properly.