Installing Modem, Heatsink and Keyboard
1.Reinstall the modem and the two Phillips screws.
2.Reinstall the heatsink and the three Phillips screws.
3.Flip the keyboard over and insert the small tabs at the bottom of the keyboard into the openings in the PowerBook case.
4.Pull down on the keyboard release tabs (located to the left of the F1 and F9 keys) and then press down on the top portion of the keyboard.
5.Let go of the keyboard release tabs to secure the keyboard in place.
6.Replace the PowerBook battery or plug in the power adapter.
Warning : Never turn on your computer unless all of its internal and external parts are in place and it is closed. Operating the computer when it is open or missing parts can damage your computer or cause injury.
7. Restart the computer.
Replacing International Modems
After you have replaced a modem in Europe or Asia, open the software utility Modem Country Selector and verify that the modem is set to the correct country. Modem Country Selector is located in the Apple Extras folder on your hard drive or can be downloaded as part of the Apple Modem Updater software bundle at http://asu.info.apple.com.
Apple Computer, Inc.
© 2000 Apple Computer, Inc. All rights reserved.
Under the copyright laws, this document may not be copied, in whole or in part, without the written consent of Apple.
The Apple logo is a trademark of Apple Computer, Inc., registered in the U.S. and other countries. Use of the “keyboard” Apple logo
Every effort has been made to ensure that the information in this document is accurate. Apple is not responsible for printing or clerical errors.
Apple Computer, Inc.
1 Infinite Loop Cupertino, CA
Apple, the Apple logo and PowerBook are trademarks of Apple Computer, Inc., registered in the U.S. and other countries.
4 | PowerBook G3 Series Bronze Keyboard - Modem |
