PART NAMES AND FUNCTIONS

Your external DVD-ROM may differ slightly from the figures shown, however the controls will operate as described below.

Front Panel Of The Drive

1.Disc Ready/Read LED:

This LED is used to indicate the disc access status.

2.Eject Button:

Press this button to open the disc tray. To close the disc tray, gently push the front of the tray.

3.Emergency Eject:

In case you cannot supply power to the drive but want to remove a disc from the tray, push a small rod (paperclip) about 5cm long, through the Emergency Eject hole to disengage the gears inside. Then pull the tray out manually. After removing the disc, gently push the tray back to its original position. This procedure is only to be used in the case of an emergency and is not meant for normal operation.

- 2 -