Reference Guide

14.Pause at New Page Choices: YES NO

Determines whether ThinkTank will pause before begin- ning a new page. Set this format to YES if you are using single sheets of paper that have to be fed in- dividually into your printer. When the new sheet is ready, press the space bar to resume printing or press ESC to finish the document without pausing.

If you are using continuous—form paper, set this for— mat to NO and ThinkTank will print without pausing.

15.Number of Copies

Range: 1—10000

Determines how many copies of your outline are prin- ted. (1)

16.Printer Initialization Message

Range: 0—40 characters

Some printers, or the adapters which connect them to your computer, require a setup or initialization mes- sage to print properly. For example, the message may tell the printer how to behave when it reaches the end of a line. Your printer manual or dealer can tell you whether such a message is necessary and what it- should be. If your printer, like most, does not require an initialization message, leave this format empty. If in doubt, try printing without a message. If the results are unsatisfactory —— for example, if your printer tries to print the entire document on one line —— you will need to enter an initialization message.

Sometimes printers require an “unprintable” charac- ter like CTRL—I, ESC, or a carriage return in an initialization message. You can enter most of these characters directly into the message; to enter CTRL—I, for example, just press CTRL—I. But suppose you have to enter a carriage return. If you try to do so, ThinkTank will think you’re ending the mes- sage and return to the instructions for reviewing

—147—