ThinkTank Manual

Copy Requires a Selection

Where It May Occur: COPY (Paragraph Editor)

Possible Causes: You pressed CTRL—Cto copy part of a paragraph, but no selection is defined. First you must identify the text you want to copy by selecting it.

Suggested Solutions: Press CTRL—S to START a selection, move the flashing cursor to define it, and press CTRL—S again

to finish it. Then move the flashing cursor to the point at which you want to make the copy. Now press CTRL—C.

Disk Full!

Where It May Occur: Varies

Possible Causes: Your outline has filled all the allotted space on your disk.

Suggested Solutions: You have three choices:

1.Delete portions of your outline that are no longer needed.

2.Split the outline into two or more parts by using the PORT command to move some of it to another disk, or by copying the file to another disk and deleting duplicate portions.

3.If you have a hard disk drive, use the PORT command to move the outline to a disk with more space. (This technique will not work on a floppy disk system unless your drives have different capacities.)

We recommend using the PERCENT command to monitor your use of disk space.

—204—