4.2

Keyboard

Selectable

Options:

The following modes

of operation

are

activated

whenever the

CONTROL and

RESET (CTL-RESET) keys

are pressed

at the same time and this key sequence is followed by:

 

 

ESCape

RocketChip runs at 1MHz (Normal Apple speed)

 

 

RETURN

RocketChip returns to 5MBz or previously set RocketSpeed

 

 

of 50KHz to 5MHz.

 

 

 

Space Bar

RocketChip runs immediately without changing speed.

 

Open-Apple

Cold boot (Key does not need to be held down)

 

 

CONTROL-Z

Cold boot for Apple II and II Plus systems.

 

 

CONTROL—D

Deletes 2 second pause after CTL-RESET

 

 

CONTROL-F

Restores 2 second pause after CTL-RESET (Key sequence is:

 

 

Hold CONTROL—F then hit RESET for Apple IIe & IIc. For

 

 

Apple II & II Plus: CONTROL—RESET F—REPEAT)

 

4.3Software Speed Selection: The RocketChip speed can be also be changed by using software commands in Applesoft BASIC using Applied Engineering's Transwarp protocol.

To

get RocketSpeed(5MHz)

Type:

POKE 49268,0

<RETURN>

To

get Apple speed(lMHz)

Type:

POKE 49268,1

<RETURN>

4.4

Configuration

Software:

The configuration disk allows the user

to modify the features of the RocketChip. This disk provides ProDOS files

(Front

side) and

DOS 3.3 files (Back side) . The configuration set by

the

user is retained

until the power is turned off. The following files

can

be run

by typing:

 

 

] BRUN Filename <RETURN> in DOS 3.3 [OR]

] -Filename <RETURN> [OR] -Dir/Filename <RETURN> in PrODOS [OR] ] 10 PRINT CHR$(4), “BRUN Filename” <RETURN> in BASIC

Filenames: SPEED.5MHZ/4MHZ/3MHZ/2MHz/1MHz/500KHz/250KHz/l00KHz/50KHz AUDIO.NORMAL/SILENT/DisTORTED/MUSIC/HIFI (Selecting MUSIC or HIFI will slow down the RocketChip and game play)

PAUSE.AT.RESET (Restore 2 second pause after CTL—RESET) NOPAUSE.RESET (Delete 2 second pause after CTL-RESET) ROCKET.WAIT (Runs Monitor Wait routine at RocketChip speed)

TRANSWARP.CMD (AE TRANSWARP protocol enabled) NOTRANSWARP.CMD (AE TRANSWARP protocol disabled)

STD.LANG.CRD

NONSTD.LANG.CRD (Titan, Saturn, SwyftCard, etc.) IIPLUS.NOBOOT (CTL—Z & paddle/joystick button (Open—Apple) ignored after CTL-RESET)

IIPIUS.BOOT (All CTL—RESETS cause cold boot unless a

paddle/joystick is installed)

11