3.2 Rocket.~hip Installation for the Apple IIC.
MAKE SURE TEAT THE COMPUTER POWER IS "OFF”
STEP #1: Removing the Apple IIc cover.
Turn the computer over so that the bottom side is up and the keyboard side is down, resting on the work surface. Remove the six (6) screws that are shown in Figure 3. Note that two screws (#1 & #2) are larger than the others. Save the screws that you have removed.
Figure 3 - Apple IIc Bottom Side
Turn the computer over so that the keyboard side is up. Use a small flatbladed screwdriver to release the plastic latches which hold the top cover in place. Start in the front of the case and work toward the back of the case, being careful not to damage the plastic. Do not use excessive force.
There are two case styles for the Apple IIc. For the two piece case, try to leave the back plate which surrounds the back connectors and the power switch attached to the cover.
When all of the latches are released, pull up on the top cover to remove it and set it aside.
7