1 . 0 Introduction

Bits & Pieces Technology is pleased to introduce you to RocketChip — the most advanced single—chip accelerator available for the Apple II, II Plus, IIe and IIc computer marketplace. It does not require cables, slots or a complicated installation procedure. RocketChip does speed up program execution from all memory locations (64k or 128k), 1.6 Megabytes of auxiliary memory, expansion ROMs, and peripheral board ROMS, while retaining normal game paddle/joystick operation and offering you the choice of normal or unique game play sounds

2 . 0 RocketChip Features

*Operates from 5MHz to 50KHz — 5 times faster than normal Apple speed to 20 times slower than normal Apple speed of lMHz.

*Requires very little power - Less than l00mA

*Easy to install and does not require a slot.

*Standard power—up configuration or can be programmed by the user.

*Keyboard selectable special features

*Emulation of AE Transwarp speed setting protocol.

*Accelerates all memory locations:

*System memory (64k or 128K) *Auxiliary memory up to 1.6 Megabytes *Expansion ROMs.

*Peripheral card ROMs.

*Accelerates all 80 column operations

*Non-standard configurations of the RocketChip registers are retained until the power is turned off.

3 . 0 RocketChip Installation Procedure

The installation of RocketChip into your Apple computer is an easy procedure when you follow the steps outlined in this section. If you have an Apple II, II Plus, or IIe the installation steps are detailed in Section 3.1. If you have an Apple IIc, the installation requires disassembly of the computer case, the removal of the 65C02 microprocessor and replacement with the RocketChip. The Apple IIc installation steps are detailed in Section 3.2. If you do not feel comfortable disassembling the Apple IIc, please refer to your dealer for additional assistance.

You will need the following tools to install your RocketChip;

1 IC chip puller tool or a small flatbladed screwdriver

1 Medium Phillips screwdriver - For Apple IIc installation

3