Power Mac G4 / Macintosh Server G4
SCSI Hard Drive
Replacement Instructions
Be sure to follow the instructions in this sheet carefully. Failure to follow these instructions could result in damage to your equipment and may void your warranty.
Note: Written and video instructions covering
Tools Required
•Phillips screwdriver
•
Backing Up Your Data
Warning: Before replacing your hard drive, make sure you back up all data on the drive.
Opening the Computer
Warning: Always turn off your computer before opening it to avoid damaging its internal components.
1.Place your computer on a clean, flat surface.
2.If you think your computer is in sleep, press the power button on the front of the computer to wake it.
3.Shut down your computer by opening the Special menu and choosing Shut Down. Then wait five minutes for the computer’s internal components to cool down.
4.If you attached a security cable through the computer’s lockable cover latch, remove the cable.
5.Unplug all other cables from the computer except the power cord.
6.Touch the metal PCI access covers on the back of the computer. (Figure 1A)
