6Touch the metal shield that is visible inside the recessed latch area before touching any components on the main logic board. This helps protect the computer from damage caused by electostatic discharge.
Important: To avoid electrostatic discharge, always ground yourself by touching the port access covers before you touch any parts or install any components inside the computer. To avoid static electricity building back up in your body, do not walk around the room until you have completed your installation and closed the computer.
7Disconnect the power cord from the computer.
8Remove the SDRAM DIMM from its
Note: Insert the memory module into one of the two slots, whichever is open.
4 - iMac (Slot Loading)
