APPLICADS
APPLICA USB to PS2 adaptor
DS manual 081606A
APPLICA Docking Station with Sound ADS100
Technical Support
If you encounter any problems that cannot be quickly solved by following the problem solving checklist and display troubleshooting sections, please call
or
APPLICADS & PRO Installation
Thank you for selecting Applica solutions for your
Your APDS-XP and APDSPRO-XP DSpackaging includes:
Applica XP SP2 software (CD) | |
ApplicaDS PCI card | |
for APDS |
|
| Applica USB Keyboard Mouse adapters (2 units) |
for APDSPRO |
|
ADS100 | Applica Multimedia USB Docking station ( 2units) |
Installation Introduction
Applica XP installation is different than the standard installation of most application soft- ware you have experienced in the past. Applica software is an addition to the operating system, and the installation process must be executed correctly to ensure proper opera- tion of the product. Although we have tried to make the installation as simple as possible, the variations in computer systems could possibly make your installation unique and therefore you may require assistance. Please follow these step by step instructions to ensure your device is properly installed.
Preparing for Installation
Please verify the items listed below. This will help ensure proper installation of Applica XP hardware and software.
♦Install and register Windows XP and all applications that you will run on this PC. Make sure Windows XP is running Service Pack 2 . (Start → Control Panel→ System→ General)
The “System:” section will indicate if Service Pack2 is currently installed.
Also check at the bottom of these statistics that your PC has at least 512MB of RAM .
Installing the Applica XP hardware and software
The Applica PCI consists of a PCI
Step 1
Shut down the computer. (Start→Turn Off Computer→Turn Off)
Install the ApplicaDS card in the selected PCI slot by firmly applying pressure along the top of the board until it slides into place (fully seated and level). Press the latch (or reinstall the set- screw) to secure the PCI card’s chrome bracket into place. Check that all other PCI boards have not been accidentally lifted out of their slots.
Plug the second monitor, keyboard and mouse into the appropriate connectors on the board.
Turn on your computer. The computer will automatically recognize that the new hardware is present and will install the appropriate PCI driver. However, the new monitor will not start completely until the Applica XP software is installed.
Install the USB converter in any USB port. Connect the second ps/2 keyboard and mouse to the converter.
