Kitty Kabana ™
LITTER BOX COVER
Getting Started
Make sure you have all of the parts listed below
1.Transparent tubes (2)
2.Metallic rod
3.Curved tubes (already preassembled in kabana)
4.Preassembled Kabana
Models
LMT250
LME9000MW
LME9250
3
4
1
To Assemble | 2 |
| C |
A | B |
1.Insert the metallic rod through the looped fabric located on top of the preassembled kabana (A).
2.Position the ends of the metallic rod over the curved tubes that are already preassembled inside the kabana (B).
3.Press the ends of the metallic rod into the curved tubes, (where the kabana's fabric has an opening), until it snaps into place (C).
Note: The two remaining transparent tubes are installed at the end.
D |
How to install the LitterMaid Kitty Kabana™ onto your LitterMaid® Litter Box
1. Remove the 4 plugs located on the corners of the litter box's top housing (D).