6
OpERATION
press [MODE] to select:
EM HEAT: (only for heat pumps with auxiliary heat)
Thermostat controls auxiliary heat. Heat pump will not
operate in EM HEAT mode.
HEAT: Thermostat controls only the heating system.
Off: Heating and cooling systems are off.
COOl: Thermostat controls only the cooling system.
AUTO: (if enabled in installer setup) Thermostat
automatically selects heating or cooling depending on
the indoor temperature.
press [DONE] to save and exit, or [CANCEl] to exit
without saving. The thermostat will save and exit if
nothing is pressed within 10 seconds.
press or to adjust the current set point.
(See Program Schedule Holds on pages 14-16 for more
information.)
SElECT SySTEM MODE
(EM HEAT/HEAT/OFF/COOL /AUTO)
CHANGE TEMpERATURE SET pOINT
61000728A 8600 Tstat Owners.indd 6 10/7/10 11:44:54 AM