Aquatic AI21AIR7242CHS specifications hotsoak, Specifications, Fax-On-Demand Document #1251

hotsoak 76

hotsoak series Model # AI21AIR7242CHS

Two Person Bath

Deck Width 4 3/4”

24 3/4”			41 1/2”
		43 1/2”
	Deck Width 4 1/4”

71 1/4”

21”

68 3/8”

411/2”

38 3/4”

Rough-In Plumbing

Measurements

24”

12 1/4”

22”

2 1/4”

SPECIFICATIONS:

General Specifications:

Tub Size	71	1/4” x 41 1/2” x 24”
	181 cm x 105 cm x 61 cm
Bathing Well	43	1/2” long
	24	3/4” wide
	21	1/4” interior depth
Shipping Weight	188 lbs. / 85.5 kg
Tub Weight Filled	1359 lbs. / 618 kg
Tub Weight Only	138 lbs. / 63 kg
Gallons to Overflow	163 gal. / 618 L

Electrical Specifications:

Pump	1/15 HP; 1.3 AMP; 110V
Heater	1.5 kW; 12.5 AMP; 110V
Requirements	20 AMP; 110V, separate circuit
	required protected w/ Class A GFCI

Fax-On-Demand

Document #1251

Standard equipment:

Aquatic Quality Features:

-1.5 kW Inline Maintenance Heater

-Run-Dry Pump with 20-Minute Timer

-2 Circulation Portal Covers

-Bath-side On/Off Electronic Button

-“Quiet Pad” Anti-Vibration Pump Mount for Quiet Operation

-Slip Resistant Floor

-Extra Deep and Long Bathing Well

-Pre-leveled ABS Support Base

-Heat-bent rigid PVC piping for optimum sanitary conditions

-Durable, easy to clean, Lucite® Cast Acrylic Surface

-available in 8 Standard No-Charge Colors

UL & IAPMO Listed, Factory TestedLimited Lifetime Warranty

optional equipment:

•Chromatherapy LED Lighting*

•Comfort Pillow - Oval or Rectangle

•Bolt-On Grab Bars

-White, Biscuit, Chrome, Polished Brass, Gold, Polished Nickel, Satin Nickel or Oil Rubbed Bronze

•Lift & Turn Waste and Overflow

-Chrome, Polished Brass, Gold, Polished Nickel, Satin Nickel or Oil Rubbed Bronze

•Cable Drive Waste and Overflow

-Chrome, Polished Brass, Gold, Polished Nickel, Satin Nickel, Oil Rubbed Bronze or Color Matched (Bone, White and Biscuit only)

•Integral Tiling Flange (Customer must specify which side(s) should receive flange)

•Premium colors

All acrylic colors featured by Aquatic match the industry’s leading fixture manufacturers.

*This whirlpool will need to be hard wired to the breaker box. Three outlets will be supplied on the whirlpool.

The manufacturer accepts a 1/4” variance. There are variations on each tub and specifications are subject to change as we improve upon our product as required. The dimensions needed for site preparation

and structure building should be measured from the tub; Aquatic Industries, Inc. assumes no responsibility for preparatory work. www.aquaticwhirlpools.com 800.555.5324

120 August 2008