Serenity studio 24
Serenity STUDIO Model # AI24AIR6636F / AI24AIR6636FTO (Tub Only)
Deck
Width
3 1/2”
22 1/2”
44”
Back Angle 26º Deck Width 3”
36”
Note: The interior of bathing well and outside of bathing well can each be specified in a different color. Only one premium color upcharge will be applied if one or more premium colors are used.
Note: This model requires a remote blower location. The connection for the air blower is under the tub; the blower may be placed up to 15 feet away and connected by piping under the floor. Please refer to the Owner’s Manual for detailed installation instructions. Document #1184 on our
66”
25 1/2”
23 1/2”
52 1/2”
SPECIFICATIONS:
36”
22 1/4”
3 1/4”
25 1/2”
2 3/4”
General Specifications:
Tub Size | 66” x 36” x 25 1/2” |
| 168 cm x 91 cm x 61 cm |
Bathing Well | 44” long |
| 22 1/2” wide |
| 21” interior depth |
Maximum Water Depth | 17” |
Shipping Weight | 283 lbs. / 129 kg |
Tub Weight Filled | 966 lbs. / 439 kg |
Tub Weight Only | 225 lbs. / 102 kg |
Gallons to Overflow | 89 gal. / 337 L |
Electrical Specifications:
Blower/Heater | 1 HP; 10.5 AMP; 120V |
Requirement | 15 AMP; 120V, separate circuit |
| required protected w/ Class A GFCI |
Standard equipment:
Air Bath System:-71 Air Jets
-1 HP Variable Speed Remote Air Blower with
-600 Watt Air Heating System
-Electronic Control Package with wave and pulse Features
-Automatic Purge and Dry Cycle
-Waterproof Remote Control with Infrared Sensor and 25’ cord
Aquatic Quality Features:-Slip Resistant Floor
-Air Channels Lined with Antimicrobial Coating
-Extra Deep Bathing Well
-Durable, easy to clean, Lucite® Cast Acrylic Surface
-available in 8 Standard
optional equipment:
•Comfort Pillow - Oval or Rectangle
•Waste and Overflow for Freestanding Models
-Chrome, Polished Brass, Satin Nickel, Polished Nickel, Oil Rubbed Bronze or White
•Premium colors
All acrylic colors featured by Aquatic match the industry’s leading fixture manufacturers.
Fax-On-Demand
Document # 1004
Each Serenity Studio model is equipped with a 600 watt air heating system to raise the temperature of the air going into the bath. This air tempera- ture will be less than the bathing temperature of the water, but will help to reduce a rapid decrease in water temperature. In addition, the air coming from the air jets will feel cool against the skin, just as a breeze on a warm day cools your body. This system does not heat the water.
The manufacturer accepts a 1/4” variance. There are variations on each tub and specifications are subject to change as we improve upon our product as required. The dimensions needed for site preparation
and structure building should be measured from the tub; Aquatic Industries, Inc. assumes no responsibility for preparatory work. | www.aquaticwhirlpools.com 800.555.5324 |
92 | January 2008 |