Serenity 27

Serenity Air Baths Model # AI27AIRCOPPER / AI27COPPERTO (Tub Only)

36”

 

 

52 1/2”

 

 

 

 

 

 

 

 

 

 

Back Angle 14º

Back Angle 14º

Note: Because the Serenity 27 is a one-of-a-kind handmade bath, dimensions may vary up to several inches. Please take all measurements directly from the bath.

72”

36”

27”

22 1/2”

54”

note: This model can be ordered with or without decorative rings.

Two Person Bath

Note: This model requires a remote blower location. The connection for the air blower is under the tub; the blower may be placed up to 15 feet away and connected by piping under the floor. Please refer to the Owner’s Manual for detailed installation instructions. Document #1172 on our Fax-on Demand System or on our website at www.aquaticwhirlpools.com.

36”

Rough-In Plumbing

Measurements

11 1/4”

26”

1 3/4”

SPECIFICATIONS:

General Specifications:

Tub Size

72” x 36” x 36”

 

183 cm x 91 cm x 91 cm

Bathing Well

52 1/2” long

 

25” wide

 

 

22” interior depth

Maximum Water Depth

16 3/4”

 

Shipping Weight

451 lbs. /

205 kg

Tub Weight Filled

1181 lbs. / 515 kg

Tub Only Weight

185 lbs. /

84 kg

Gallons to Overflow

120 gal. /

454 L

Electrical Specifications:

Standard equipment:

Air Bath System:

-1 HP Variable Speed Remote Air Blower with 20-Minute Timer

-600 Watt Air Heating System

-Electronic Control Package with wave and pulse Features

-Automatic Purge and Dry Cycle

-Waterproof Remote Control with Infrared Sensor and 25’ Cord

-Waste and Overflow in Oil Rubbed Bronze

Aquatic Quality Features:

-Extra Deep and Long Bathing Well

UL & IAPMO Listed, Factory Tested Limited Lifetime Warranty

optional equipment:

This model can be ordered with or without decorative rings.

Each Serenity 27 bath is handcrafted out of copper. Please note that the hammered copper with a weathered finish will vary from model to model and may gradually change with time due to copper’s unique character.

Blower/Heater

1 HP; 10.5 AMP; 120V

Requirement

15 AMP; 120V, separate circuit

 

required protected w/ Class A GFCI

Fax-On-Demand

Document # 1007

Each Serenity Air Bath model is equipped with a 600 watt air heating system to raise the temperature of the air going into the bath. This air tem- perature will be less than the bathing temperature of the water, but will help to reduce a rapid decrease in water temperature. In addition, the air coming from the air jets will feel cool against the skin, just as a breeze on a warm day cools your body. This system does not heat the water.

The manufacturer accepts a 1/4” variance. There are variations on each tub and specifications are subject to change as we improve upon our product as required. The dimensions needed for site preparation

and structure building should be measured from the tub; Aquatic Industries, Inc. assumes no responsibility for preparatory work.

www.aquaticwhirlpools.com 800.555.5324

June 2008

95

Page 1
Image 1
Aquatic AI27AIRCOPPER, AI27COPPERTO specifications Serenity, Specifications, Fax-On-Demand Document #

AI27AIRCOPPER, AI27COPPERTO specifications

Aquatic AI27AIRCOPPER and AI27COPPERTO represent a groundbreaking advancement in aquatic robotics, merging cutting-edge technology with innovative design to redefine underwater exploration and monitoring. These models are engineered to operate effectively in various aquatic environments, including oceans, lakes, and rivers, leveraging their advanced capabilities for both research and commercial applications.

One of the standout features of the AI27AIRCOPPER is its powerful artificial intelligence system, which enables adaptive learning and real-time decision-making. This allows the robot to navigate complex underwater terrains autonomously, avoiding obstacles and optimizing its path for efficiency. The intelligent algorithms used in both models facilitate enhanced image and data processing, enabling them to gather and analyze critical environmental information quickly.

In addition to AI, both models boast robust sensor technologies, including high-definition cameras, sonar systems, and various environmental sensors. The integration of these sensors allows for comprehensive data collection, including water quality analysis, temperature readings, and underwater mapping. The AI27COPPERTO is particularly noteworthy for its advanced telemetry features that ensure continuous data transmission to surface stations, enabling seamless monitoring and analysis.

The durability and design of the AI27 series are tailored for harsh aquatic conditions. Constructed from high-grade materials resistant to corrosion and wear, these robots are built to endure extreme pressures and temperatures. Their hydrodynamic shape minimizes drag, ensuring prolonged operational times and enhancing energy efficiency. The energy systems used in both models incorporate advanced battery technology, enabling extended missions without the need for frequent recharging.

Furthermore, the AI27 series supports modular attachments, allowing users to customize their robots for specific tasks. Whether it’s conducting marine surveys, searching for submerged objects, or studying aquatic life, the flexibility of these machines makes them an invaluable asset for researchers and explorers alike.

In conclusion, the Aquatic AI27AIRCOPPER and AI27COPPERTO stand out as pioneers in the field of aquatic robotics. Their combination of AI-driven capabilities, cutting-edge sensors, robust design, and modular functionality sets new standards for underwater exploration and monitoring, promising to unlock a wealth of information about our aquatic ecosystems while enhancing safety and efficiency in marine operations.