San Simeon
luxury series Model # AI6038O / AI6038Oto (Tub Only)
Deck Width
1 3/4”
2
37 3/4”
1
59 1/2”
20 1/4”
18 1/2”
37 3/4”
16 1/2”
Note: Tub Only units do not come standard with the
9 3/8”
2 1/2”
SPECIFICATIONS:
General Specifications:
Tub Size | 59 1/2” x 37 3/4” x 20 1/4” |
| 151 cm x 96 cm x 51 cm |
Bathing Well | 42” long |
| 25” wide |
| 19” interior depth |
Shipping Weight | 179 lbs. / 81 kg |
Tub Weight Filled | 641 lbs. / 291 kg |
Tub Only Weight | 97 lbs. / 44 kg |
Gallons to Overflow | 60 gal. / 227 L |
Gallons to Operate | 41 gal. / 155 L |
Electrical Specifications:
Pump | 1.75 HP; 12 AMP; 110V |
Requirement | 15 AMP; 110V, separate circuit |
| required protected w/ Class A GFCI |
Optional Heater | 1.5 kW; 12.5 AMP; 110V |
Requirement | 15 AMP; 110V, separate circuit |
| required protected w/ Class A GFCI |
Standard equipment:
7 Hydrotherapy Jets including:
-4 Full Size
-2 StressEaz Neck & Shoulder Therapy Jets
-1 Recessed Rotary Massage Jet
Aquatic Quality Features:
-1.75 HP
-
-”Quiet Pad”
-2 Arm Rests
-Slip Resistant Floor
-
-
-Durable, easy to clean, Lucite® Cast Acrylic Surface
-Available in 8 Standard
UL & IAPMO Listed, Factory Tested
Limited Lifetime Warranty
optional equipment:
• | Chromatherapy LED Lighting |
• Comfort Pillow - Oval or Rectangle | |
• | Jet Finish |
| - Chrome, Polished Brass, Gold, Polished Nickel |
| or Satin Nickel |
• | |
| - White, Biscuit, Chrome, Polished Brass, Gold, |
| Polished Nickel, Satin Nickel or Oil Rubbed Bronze |
• 1.5 kW Inline Maintenance Heater | |
• Lift & Turn Waste and Overflow | |
| - Chrome, Polished Brass, Gold, Polished Nickel, |
| Satin Nickel or Oil Rubbed Bronze |
• Cable Drive Waste and Overflow | |
| - Chrome, Polished Brass, Gold, Polished Nickel, |
| Satin Nickel, Oil Rubbed Bronze or |
| Color Matched (Bone, White and Biscuit only) |
• 2 HP, | |
• | Optional Pump Location |
• | Remote Pump Location |
• | |
• Hand Held Jet - Chrome or Polished Brass |
Fax-On-Demand
Document # 1050
• Premium colors |
All acrylic colors featured by Aquatic match the industry’s leading fixture manufacturers.
The manufacturer accepts a 1/4” variance. There are variations on each tub and specifications are subject to change as we improve upon our product as required. The dimensions needed for site preparation
and structure building should be measured from the tub; Aquatic Industries, Inc. assumes no responsibility for preparatory work. | www.aquaticwhirlpools.com 800.555.5324 |
March 2008 | 63 |