Aquatic AI7236RHS specifications Hotsoak, Specifications, Fax-On-Demand Document #1226

Deck Width

1 7/8”

2

hotsoak 51

hotsoak series Model # ai7236rhs

1

71 1/2”

SPECIFICATIONS:

36 1/4”

36 1/4”

23 1/4”

21 3/4”

20”

Rough-In Plumbing Measurements

11 1/4”

2 1/4”

General Specifications:

Tub Size	71	1/2” x 36 1/4” x 23 1/4”
	182 cm x 92 cm x 59 cm
Bathing Well	48	1/2” long
	24” wide
	21	3/4” interior depth
Shipping Weight	209 lbs. / 95 kg
Tub Weight Filled	875 lbs. / 395 kg
Tub Only Weight	126 lbs. / 57 kg
Gallons to Overflow	90 gal. / 341 L

Electrical Specifications:

Pump	1/15 HP; 1.3 AMP; 110V
Heater	1.5 kW; 12.5 AMP; 110V
Requirements	20 AMP; 110V, separate circuit
	required protected w/ Class A GFCIF

Fax-On-Demand

Document #1226

Standard equipment:

Aquatic Quality Features:

-1.5 kW Inline Maintenance Heater

-Run-Dry Pump with 20-Minute Timer

-2 Circulation Portal Covers

-Bath-side On/Off Electronic Button

-”Quiet Pad” anti-vibration pump mount for quiet operation

-2 Color Matched Grab Bars

-2 Arm Rests

-Slip Resistant Floor

-Pre-leveled ABS Support Base

-Heat-bent rigid PVC piping for optimum sanitary conditions

-Durable, easy to clean, Lucite® Cast Acrylic Surface

-available in 8 Standard No-Charge Colors

UL & IAPMO Listed, Factory Tested

Limited Lifetime Warranty

optional equipment:

•Chromatherapy LED Lighting*

•Comfort Pillow - Oval or Rectangle

•Grab Bar

-White, Biscuit, Chrome, Polished Brass, Gold, Polished Nickel, Satin Nickel or Oil Rubbed Bronze

•Lift & Turn Waste and Overflow

-Chrome, Polished Brass, Gold, Polished Nickel, Satin Nickel or Oil Rubbed Bronze

•Cable Drive Waste and Overflow

-Chrome, Polished Brass, Gold, Polished Nickel, Satin Nickel, Oil Rubbed Bronze or

Color Matched (Bone, White and Biscuit only)

•Factory Installed Rigid ABS Tile Flange

•Optional Pump Location

•Color Matched Acrylic Skirt

•Premium colors

All acrylic colors featured by Aquatic match the industry’s leading fixture manufacturers.

*This whirlpool will need to be hard wired to the breaker box. Three outlets will be supplied on the whirlpool.

The manufacturer accepts a 1/4” variance. There are variations on each tub and specifications are subject to change as we improve upon our product as required. The dimensions needed for site preparation

and structure building should be measured from the tub; Aquatic Industries, Inc. assumes no responsibility for preparatory work. www.aquaticwhirlpools.com 800.555.5324

August 2008 97