Aquatic specifications HotSoak, hotsoak SERIEs Model # AI7242RHS, Specifications, August

HotSoak 50

hotsoak SERIEs Model # AI7242RHS

Deck Width

1 1/2”

2 3

42 3/16”

1 4

71 1/2” 42 3/16”

18 3/4”

Two Person Bath

		Rough-In Plumbing
		Measurements
	23 1/4”	13 1/2”
21 1/2”

6 1/2”

SPECIFICATIONS:

General Specifications:

Tub Size	71 1/2” x 42 3/16” x 23 1/4”
	182 cm x 107 cm x 59 cm
Bathing Well	43” long
	24” wide
	22” interior depth
Shipping Weight	247 lbs. / 112 kg
Tub Weight Filled	877 lbs. / 398 kg
Tub Only Weight	154 lbs. / 70 kg
Gallons to Overflow	90 gal. / 341 L

Electrical Specifications:

Pump	1/15 HP; 1.3 AMP; 110V
Heater	1.5 kW; 12.5 AMP; 110V
Requirements	20 AMP; 110V, separate circuit
	required protected w/ Class A GFCI

Standard equipment:

Aquatic Quality Features:

-Run-Dry Pump with 20-Minute Timer

-1.5 kW Inline Maintenance Heater

-2 Circulation Portal Covers

-Bath-side On/Off Electronic Button

-”Quiet Pad” anti-vibration pump mount for quiet operation

-Color Matched Grab Bar

-4 Arm Rests

-Slip Resistant Floor

-Pre-leveled ABS Support Base

-Heat-bent rigid PVC piping for optimum sanitary conditions

-Durable, easy to clean, Lucite® Cast Acrylic Surface

-available in 8 Standard No-Charge Colors

UL & IAPMO Listed, Factory TestedLimited Lifetime Warranty

optional equipment:

•Chromatherapy LED Lighting*

•Comfort Pillow - Oval or Rectangle

•Grab Bar

-White, Biscuit, Chrome, Polished Brass, Gold, Polished Nickel, Satin Nickel or Oil Rubbed Bronze

•Lift & Turn Waste and Overflow

-Chrome, Polished Brass, Gold, Polished Nickel, Satin Nickel or Oil Rubbed Bronze

•Cable Drive Waste and Overflow

-Chrome, Polished Brass, Gold, Polished Nickel, Satin Nickel, Oil Rubbed Bronze or

Color Matched (Bone, White and Biscuit only)

•Factory Installed Rigid ABS Tile Flange

•Optional Pump Location

•Color Matched Acrylic Skirt

•Premium colors

All acrylic colors featured by Aquatic match the industry’s leading fixture manufacturers.

*This whirlpool will need to be hard wired to the breaker box. Three outlets will be supplied on the whirlpool.

Fax-On-Demand

Document #1225

The manufacturer accepts a 1/4” variance. There are variations on each tub and specifications are subject to change as we improve upon our product as required. The dimensions needed for site preparation

and structure building should be measured from the tub; Aquatic Industries, Inc. assumes no responsibility for preparatory work. www.aquaticwhirlpools.com 800.555.5324

96 August 2008