Aquatic AI7248R specifications General Specifications, Electrical Specifications

del ray

luxury series Model # ai7248R

Deck Width

2 1/2”

2

47 3/4”

1

71 1/2” 47 3/4”

24 1/8”

22 1/2”

20 1/2”

Two Person Bath

Rough-In Plumbing Measurements

10 7/8”

3”

SPECIFICATIONS:

General Specifications:

Tub Size	71 1/2” x 47 3/4” x 24 1/8”
	182 cm x 121 cm x 61 cm
Bathing Well	43” long
	31” wide
	23 1/4” interior depth
Shipping Weight	254 lbs. / 115 kg
Tub Weight Filled	1230 lbs. / 558 kg
Gallons to Overflow	131 gal. / 496 L
Gallons to Operate	1 bather:	111 gal. / 420 L
	2 bathers:	91 gal. / 344 L

Electrical Specifications:

Pump	1.75 HP; 12 AMP; 110V
Requirement	15 AMP; 110V, separate circuit
	required protected w/ Class A GFCI
Optional Heater	1.5 kW; 12.5 AMP; 110V
Requirement	15 AMP; 110V, separate circuit
	required protected w/ Class A GFCI F

Standard equipment:

8 Hydrotherapy Jets including:

-4 Full Size Pressure-Flo Hydrotherapy Jets

-2 Recessed Rotary Massage Jets

-2 StressEaz Neck & Shoulder Therapy Jets

Aquatic Quality Features:

-1.75 HP Run-Dry Pump with 20-Minute Timer

-Bath-side On/Off Electronic Button

-”Quiet Pad” anti-vibration pump mount for quiet pump operation

-2 Arm Rests

-Slip Resistant Floor

-Pre-leveled ABS Support Base

-Heat-bent rigid PVC piping for optimum sanitary conditions

-Durable, easy to clean, Lucite® Cast Acrylic Surface

-available in 8 Standard No-Charge Colors

UL & IAPMO Listed, Factory Tested

Limited Lifetime Warranty

optional equipment:

•	Chromatherapy LED Lighting
• Comfort Pillow -- Oval or Rectangle
•	Jet Finish
	- Chrome, Polished Brass, Gold, Polished Nickel
	or Satin Nickel
• Bolt-On Grab Bar
	- White, Biscuit, Chrome, Polished Brass, Gold,
	Polished Nickel, Satin Nickel or Oil Rubbed Bronze
• 1.5 kW Inline Maintenance Heater
• Lift & Turn Waste and Overflow
	- Chrome, Polished Brass, Gold, Polished Nickel,
	Satin Nickel or Oil Rubbed Bronze
• Cable Drive Waste and Overflow
	- Chrome, Polished Brass, Gold, Polished Nickel,
	Satin Nickel, Oil Rubbed Bronze or
	Color Matched (Bone, White and Biscuit only)
• Factory Installed Rigid ABS Tile Flange
• 2 HP, 3-Speed Run-Dry Pump Upgrade
•	Optional Pump Location
•	Remote Pump Location
• Color Matched Acrylic Skirt
• Hand Held Jet - Chrome or Polished Brass

Fax-On-Demand

Document # 1039

• Premium colors

All acrylic colors featured by Aquatic match the industry’s leading fixture manufacturers.

The manufacturer accepts a 1/4” variance. There are variations on each tub and specifications are subject to change as we improve upon our product as required. The dimensions needed for site preparation

and structure building should be measured from the tub; Aquatic Industries, Inc. assumes no responsibility for preparatory work. www.aquaticwhirlpools.com 800.555.5324

52 March 2008