Aquatic AIIS6036RSY specifications Specifications, Symphony series Model # -- See below

Symphony 11

Symphony series Model # -- See below

aiIS6036LSY / aiIS6036LSYTO (left drain) / AIIS6036RSY / aIIS6036RSYTO (right drain)

36”

Standard

Pump

Location

Right Drain Model

18”

17”

42”

37 1/4”

Deck Width 3 3/8”

51 3/8”

60”

19 1/2”

37 1/4” 36”

20 1/2” 17”

Note: Tub only model does not includeaccess panels unless ordered as an option.

Rough-In Plumbing Measurements

8 1/2”

2 1/4”

SPECIFICATIONS:

General Specifications:

Tub Size	60” x 36” x 20 1/2”
	152 cm x 91 cm x 52 cm
Bathing Well	42” long
	17” wide
	17” interior depth
Maximum Water Depth	13 1/4”
Shipping Weight	170 lbs. / 77 kg
Tub Weight Filled	556 lbs. / 252 kg
Tub Only Weight	123 lbs. / 56 kg
Gallons to Overflow	52 gal. / 197 L
Gallons to Operate	43 gal. / 163 L

Electrical Specifications:

Pump	.80 HP; 5.5 AMP; 110V
Requirement	15 AMP; 110V, separate circuit
	required protected w/ Class A GFCI

Standard equipment:

6 Hydrotherapy Jets including:

-2 Spinning Back Jets

-4 Directional Jets

Aquatic Quality Features:

-.80 HP Run-Dry Pump

-Bath-side On/Off Air Switch

-”Quiet Pad” anti-vibration pump mount for quiet pump operation

-Heat-bent rigid PVC piping for optimum sanitary conditions

-2 Arm Rests

-Color Matched integral skirt with removable access panels

-Integrally Molded Tile Flange

-Color Matched Trim and Jets (Select Colors)

-Right or Left Hand Drain

-Durable, easy to clean, Lucite® Cast Acrylic Surface

-Available in 8 Standard No-Charge Colors

UL and IAPMO Listed, Factory Tested

Limited 10 Year Warranty

optional equipment:

•Comfort Pillow--Oval or Rectangle

•Lift & Turn Waste and Overflow

-Chrome, Polished Brass, Gold, Satin Nickel, Polished Nickel or Oil Rubbed Bronze

•Cable Drive Waste and Overflow

-Chrome, Polished Brass, Gold, Satin Nickel, Polished Nickel, Oil Rubbed Bronze or

Color Matched (Bone, White and Biscuit only)

•Removable Access Panels (Tub Only)

All acrylic colors featured by Aquatic match the industry’s leading fixture manufacturers.

Fax-On-Demand

Document # 1279

The manufacturer accepts a 1/4” variance. There are variations on each tub and specifications are subject to change as we improve upon our product as required. The dimensions needed for site preparation

and structure building should be measured from the tub; Aquatic Industries, Inc. assumes no responsibility for preparatory work. www.aquaticwhirlpools.com 800.555.5324

138 October 2007