IDLEWILD COLLECTION
ASSEMBLY INSTRUCTIONS
ARBOR BASE
PLEASE READ COMPLETELY BEFORE YOU BEGIN ASSEMBLING
HARDWARE LIST
A | 2½” Wood screws (16) |
PARTS LIST
Base assembly (2) | Assembled arbor base with planters |
Braces (4) |
|
IMPORTANT: The side panel width will determine the location of the braces. For 17½” width arbors (Rosedale, Astoria, Nantucket and the Longevity) attach inside arbor base assembly arms. Refer to STEP 2A. For 24” width arbors (Victoria, Glendale, and the Casablanca) attach outside arbor base assembly arms. Refer to STEP 2B for .
STEP 1 | STEP 2A |
A
A
A
Attach 2 braces to each base assembly. Braces may go on outside of arms depending on Arbor width.
Attach braces to inside of arbor base assembly, then to arbor frame.
820.3163 Arbor Base | 1 of 2 |
updated 09/09/2005
Division of LWO Corp. / P.O. Box 17125 / 3841 North Columbia Boulevard / Portland, Oregon
