Arcam CR-389 Remote Control: User Guide and Functions

Using the CR-389 remote control

Ensure that the FM mode is selected using the FM/DAB toggle button. The FM LED above the FM/DAB button is lit briefly when FM is selected.

These buttons allow access to individual preset stations. To select a preset press the corresponding keypad button.

For presets 9–16, press and hold the corresponding preset button for one second. Use the Tune buttons to access FM memory presets 17 to 30.

MODE (Tuning mode)

This button toggles between

PRESET and TUNE modes.

			MENU (RDS mode)
			This button scrolls through RDS modes, when available.
			DISP (Display)
			This button allows you to dim or switch off the tuner display.
				STANDBY
	TUNER			This button switches the tuner (and the amplifier if
				This button switches the tuner (and the amplifier if
FM DAB				appropriate) between ‘On’ and ‘Standby’.
				appropriate) between ‘On’ and ‘Standby’.
FM	MENU	DISP		Tune buttons
DAB				These buttons enable you to scroll through the
				These buttons enable you to scroll through the
1–9	2–10	3–11	4–12	stored station selections one at a time, or to tune
				up or down, depending on the Tuning mode.
5–13	6–14	7–15	8–16
MODE			BAND	BAND
				This button toggles between FM and AM.
		SP1
ENTER		SP2	DISP
ENTER			DISP

SEL

These buttons offer basic control over Arcam amplifiers, such as the A65, A75 or A85.

PHONO	AUX	CD	TUNER
AV	DVD	VCR	TAPE

AMPLIFIER

NOTE: DAB (Digital Audio Broadcast) refers to Arcam DAB tuners such as model DT81.

T61

RPT

PROG DISP

CR-389

These buttons offer basic control over Arcam CD players, such as the CD62, CD72, CD82 or CD92.

NOTE: Remember to install the two AAA batteries supplied before trying to use your remote control.

Do not place anything in front of the display area on the tuner (where the IR receiver is located), or the remote control may not work.