Archos 104 Ports, Buttons, and Connections , First Time Usage

5
5
1
1
Ports, Buttons, and Connections
Ports, Buttons, and Connections
A Power jack – to connect an optional AC adapter/charger
B USB 2.0 port – To connect to your computer to transfer fi les to Archos™ 104 and
to charge its battery
C Headphone Jack
D On button (hold 3 seconds) & Menu options
E Off button (hold 3 seconds) & Stop/Escape *
Navigation pad
F Move Up & increase volume
G Move Down & decrease volume
H Move Left (decrease value) or audio rewind
I Move Right (increase value) or audio fast forward
J Play/Pause/Enter
1 CHG – Battery charging indicator
2 HDD – Hard drive activity indicator
3 ON – ON/OFF indicator light
* Hardware reset: in the event that your Archos™ 104 freezes operation (due to electrostatic phenomena for example), you can
reset the Archos™ 104 by holding down on the STOP/ESC button x for 15 seconds.
6
6
2
2
First Time Usage
First Time Usage
2.1 Charging the Battery
2.1 Charging the Battery
Before using your Archos™ 104 for the fi rst time, completely charge the battery for two hours.
• The Archos™ 104 is charged through its USB connector. Connect the included USB cable to a running
computer and plug the other end into the Archos™ 104 while it is off. This will charge its internal battery. The
CHG indicator will also light up to show that its battery is charging.
• The battery is fully charged when the CHG indicator starts blinking.
CHG indicator is on: CHG indicator is blinking:
The battery is currently being charged. The battery is fully charged.
• You can purchase an Archos charger/adapter to charge the battery from a wall outlet. The blue CHG indicator
lights up to indicate that the external adapter is connected. The battery will charge automatically when it is
plugged in.
• After the fi rst initial full charge, you may use the Archos™ 104 while the AC adapter is plugged in.