Argus Camera DC2700 manual Appendix I Trouble Shootings, Troubles Solutions

Argus DC2700 Camera User Manual

Appendix I – Trouble Shootings

	Troubles	Solutions
1	Fail to establish a USB connection.	Check if the USB connection between the
		computer and the camera has been established.
		Check if the camera is ON
		Make sure your computer is operated with
		Windows 98 (versions 2) or higher versions.
2	Fail to view images from MyCamera,	Make sure USB connection is established before
	PC Host Software.	powering		up	the	camera	and		opening	the
		“ MyCamera” .
		You	may	press “ F5” (Refresh)					to see if	the
		problem has been fixed.
3	Deleting MyCamera.	Go	to “ Control			Panel”	of	your PC		->
		“ Add/Remove			Programs” ,		select		“ MyCamera”
		from the list and click						“ Add/Remove” .
		MyCamera will then be deleted.
4	Abnormal and distorted images shown	Improper handling (e.g. crashing) of the camera
	on Cyber Display	would cause a sudden bad contact of battery
		circuitry.
		Disconnecting USB while the camera is ON
		would cause a hang-like phenomenon.
		Open the battery door and close it again will
		solve the problems.
5	Cyber Display turns “ RED”	Low Battery power would cause the Display to
		turn RED. Replace the batteries will enable the
		Cyber Display to function properly again.
		Alkaline batteries are recommended.
6	Camera takes lesser pictures than	Please see the table, “Suggested Numbers of
	suggested	picture at different JPG and FORMAT mode” to
		see if you are justifying under same condition.
		Corrupted image files may consume internal
		memory storage. Please go to “REVIEW” of
		main menu, select “DELETE ALL” or you may
		format the memory storage directly (“MENU” ->
		“SETUP” -> “FORMAT ” ) to eliminate the
		corrupted files.

Page 24 of 28