Manuals / Ariens / Lawn and Garden / Lawn Mower

Ariens 070 - Professional G, 071 - Professional G, 072 - Professional G Checking the Engine Oil

Models: 070 - Professional G, 071 - Professional G, 072 - Professional G

1 24
Download 24 pages 9.54 Kb
Page 12
Image 12

Lubrication and Maintenance (Continued)

1

PJ0370

1. Grease Fitting on the Front Axle

Figure 3: Steering Axle Pivot

Checking the Engine Oil

Check the engine oil level daily. Never operate the engine with the oil level below the low mark on the dipstick. See your engine manual for oil specifications and oil filter service instructions.

To check the oil level:

•Clean around the dipstick to prevent dirt from entering the tube.

•Remove the dipstick and wipe off the oil.

•Put the dipstick back in place. Be sure it is all the way down.

•Remove the dipstick again and note oil level.

•Add oil, if needed. Do not overfill.

•Put the dipstick back in place. Be sure it is all the way down.

Changing the Engine Oil

•Read your engine manual for recommended change schedule.

•Move the tractor to a level area. Lock the brake.

•If the engine is cold, let it run for 5 minutes.

•When the engine is warm, stop it and raise

the rear fender.

WARNING: Engine muffler and other parts are hot.

4 5 3

2

1

3

PJ0380

1.Grease Fittings for the Steering Arms

2.Grease Fittings for the Steering Columns

3.Adjusting Bolt

4.Lock Nut

5.Adjusting Nut

Figure 4: Steering Arms

•Clean the areas around the dipstick and drain plug.

•Remove the dipstick.

•Put an open top container that will hold four quarts under the drain plug.

•Remove the drain plug.

•Allow the engine to drain completely.

•Clean and reinstall the drain plug.

•Remove the oil filter (some models), clean the oil filter port and install a new oil filter according to the instructions on the oil filter.

•Fill with new oil to the “Full” mark on the dipstick.

•Replace the dipstick. Lower the rear fender.

•Start the engine and check for leakage at the drain plug. Tighten the plug if leakage occurs.

Checking the Battery Fluid

Check the battery fluid every 200 hours. Use caution and wear eye protection when checking the battery. To check the battery:

•Clean the top of the battery.

•Lift the filler caps.

•If the fluid level is below the split rings in the filler tube, add distilled water. Do not fit above the split ring. Do not use a metal funnel.

•Reinstall the filler caps. Push them all the way down.

10

Page 11 Page 13
Page 12
Image 12
Ariens 070 - Professional G, 071 - Professional G, 072 - Professional G Checking the Engine Oil, Changing the Engine Oil
Page 11 Page 13

070 - Professional G, 071 - Professional G, 072 - Professional G specifications

Ariens has long been a recognized name in the outdoor power equipment industry, particularly in the realm of snow removal. Among its impressive lineup is the Professional G series, which includes the Ariens 070, 071, and 072 models. Designed for demanding commercial and residential applications, these machines are built for durability, efficiency, and ease of use.

The Ariens 070 Professional G features a powerful engine designed to tackle the toughest snow conditions. With its robust 420cc engine, this model is capable of producing substantial torque for efficient snow clearing. It includes a 24-inch clearing width and a 21-inch intake height, making it suitable for deep snowfall while allowing for quick and efficient passes. The heavy-duty construction of the 070 ensures that it can withstand rigorous use, maximizing its lifespan and reliability.

Moving on to the Ariens 071 Professional G, this model takes performance up a notch with a larger 24-inch clearing width. It also features a comprehensive 12-inch impeller that enhances the snow discharge distance, allowing users to throw snow further away from their clearing path. With increased handling capabilities, the 071’s enhanced friction disc drive system offers improved control and traction on slippery surfaces. This model is ideal for those who frequently encounter heavy or wet snow.

The Ariens 072 Professional G is the flagship of the series, boasting advanced features tailored for professional-grade performance. It is equipped with a 420cc engine and incorporates Ariens' patented Auto-Turn technology, which enables seamless maneuverability. This model also comes with premium functionalities such as an adjustable drift cutters and a remote chute rotation control, giving users the ability to direct snow discharge from the operator's station, maximizing control during operation.

All three models feature heavy-duty steel frames and reinforced impellers for increased durability and reduced wear over time. Ergonomic controls and adjustable handle heights make these models user-friendly, allowing operators to work efficiently without unnecessary strain. Moreover, these snow blowers feature larger tires for improved traction in all types of snow conditions, making them an excellent choice for winter maintenance tasks.

In summary, the Ariens 070, 071, and 072 Professional G models exemplify the brand's commitment to quality and performance. With their powerful engines, user-friendly designs, and advanced snow-clearing technologies, these snow blowers are primed to tackle everything from light dustings to heavy winter storms, meeting the needs of both professional landscapers and homeowners alike.