10 - 3310.3 LOWER BOOT INSTALLATION

28" and 30" Mower Pans

Lift deflector, slide bottom edge of lower boot between
runner and bottom edge of mower pan.
Position tab of deflector bracket in hole of boot and into
pan at rear of discharge opening (bracket holds
deflector away from boot). Secure with wing nut on
boot clip at front on discharge opening.
NOTE: For installation of boot on 28" pan, remove sec-
tions of boot indicated by score line, Figure 35. Be
careful not to damage area around that which is being
removed.

28" and 32" Mower Pans

Position lower boot so that the two rear pan clips are in
line with the notches in the boot. Place boot in front pan
clip. Rotate boot counterclockwise until rear pan clips
are seated properly in boot notches. Secure boot with
L-pin.
Slide tube through hole in upper boot. Line up handle
with tube retainer on lower boot. Slide tube forward,
place handle over tube retainer and secure.
Figure 34
1. Wing Nut
2. Boot Bracket
3. Lower Boot
4. Boot Clip
1
2
2
3
3
4
31
30" Mowers
28" & 32" Mowers
Score Line
Figure 35
Figure 35
1
2
3
4
5
6
1. Cover
2. Service Bar
3. Lower Boot
4. Tube
5. Bagger Basket
6. Upper Boot