How to load your dishes
Before washing, a few small steps can help you get a better wash and keep your dishwasher performing to its best. Remove the largest scraps of food left over on your plates, soak saucepans and frying pans with tough baked on food. After loading your dishes, make sure the blades on the sprayer arm turn well.Do not place glasses and cups on top of one another, and make sure the dishes are not touching.
First.
Before placing the dishes in the racks, remove the largest scraps of food left over on your plates, you will thus avoid blocking the filter, which would reduce the efficiency of the wash.If the saucepans and frying pans are very dirty, allow them to soak before being washed. To make it easier to load your dishes, pull the racks out.
What goes into the lower rack?
We recommend you place the most difficult dishes to wash into the lower rack: saucepans, lids, soup bowls and plates (a load example is shown in the photo).
•Serving dishes and large lids: place them on the sides of the rack.
•Saucepans, salad bowls: must always be placed upside down
•Very deep dishes: place them obliquely, thus allowing water to run down them and cleaning them better
The cutlery basket can be split up by pulling out the handle.
When you only have little cutlery to wash, you can use just half the basket; save space for other crockery or place the other half of the basket in the upper rack instead (see figures A and B).
This basket is equipped with two removable grids: insert the cutlery one by one into the slots.
Warning:
that they don't touch.
What goes into the upper rack?
Place delicate and lightweight dishes in the upper rack: glasses, tea cups and coffee cups, saucers - but plates too - shallow salad bowls, slightly dirty frying pans and shallow pans (the photo illustrates a few examples). Position lightweight dishes in such a way as to avoid their being moved by the spray of water.
After loading the dishes, remember to check that the blades on the sprayer arms can turn freely without knocking against any dishes.
How to adjust the top rack.
The upper rack can be set in high or low position to enable you to organize your dishes effortlessly.
| 1 | 2 |
|
| |
Fig.F |
| 3 |
| 4 | |
|
|
Open the rail stop flaps and pull the rack out completely. Now place it in high or low position, then slide it along the guide rails until the front wheels also go in. Now close the rail stop flaps. Follow the sequence of actions illustrated in figure "F".
lower rack
How to use our racks
upper rack
knives and utensils with sharp blades or tips should be positioned with the sharp parts at the bottom.
Position all cutlery items so
B
A
4 ARISTON DISHWASHER - User Manual | www.aristonappliances.us |
