Energy Saving tips
1.Do not place warm foods into the appliance. Allow warm foods to cool first. Do not install the appliance near cookers, radiators or other sources of warmth.High ambient temperatures ca- use longer, more frequent operation of the compressor.
2.In order to make the cooling system work efficiently,please make sure the side plates and ba- ck plate of the product are with some distance from the wall. It is strongly recommended that its back is 75mm away from the wall, its sides at least have a space of 100mm sepa- rately and the height from over its top is not less than 100mm.
3.When the product works, please do not open the door too often or leave the door open any longer than necessary.
4.Do not set temperature any colder than necessary.
5.The direct cooling refrigerator (with a freezer) needs to be defrosted when necessary. This will improve the cold transfer and reduce energy consumption.
6.The sketch map shows the right combination of the drawers, crisper and shelves which can lead to the more energy efficiency.If users adjust the combination,it would result in the energy- consuming.
7.Store food logically. Do not exceed the storage period specified
Trouble Shooting
Noises during Operation
The following noises are normal characteristics of the appliance when it works:
Whenever the compressor switches on or off, a click can be heard.
As soon as the compressor is in operation, you can hear it humming.
When refrigerant flows into thin tubes, you can hear bubbling or splashing noises.
Even after the compressor has been switched off, the noise of splashing can be heard for a short time.
Repairs to the freezer may only be conducted by qualified service engineers. Improper repairs can lead to significant hazards for users. If your appliance needs repairing, please contact your spec- ialist dealer.
10
