Description of the washing machine
AUS
Control panel
ON/OFF
button
TEMPERATURE | CHILD | |
button | ||
LOCK | ||
| ||
| button |
DISPLAY
CLEANING ACTION
button
WASH
Detergent dispenser drawerCYCLE SELECTOR KNOB
SPIN
button
OPTION
button and indicator light
DELAY
TIMER
button
START/PAUSE
button and indicator light
Detergent dispenser drawer: used to dispense detergents and washing additives ( see “Detergents and laundry”).
ON/OFF 
button: press this briefly to switch the machine on or off. The START/PAUSE indicator light which flashes slowly in a green colour shows that the machine is switched on. To switch off the washing machine during the wash cycle, press and hold the button for approximately 3 seconds; if the button is pressed briefly or accidentally the machine will not switch off.
If the machine is switched off during a wash cycle, this wash cycle will be cancelled.
WASH CYCLE SELECTOR KNOB: used to set the desired wash cycle (see “Table of programmes and wash cycles”).
OPTION button and indicator light: press to select the available options. The indicator light corresponding to the selected option will remain lit.
CLEANING ACTION button 
: to select the desired wash intensity.
TEMPERATURE 
button: press to reduce or completely exclude the temperature; the value appears on the display.
SPIN 
button: press to reduce or completely exclude the spin cycle; the value appears on the display.
DELAY TIMER 
button: press to set a delayed start for the selected wash cycle; the delay period appears on the display.
START/PAUSE button and indicator light: when the green indicator light flashes slowly, press the button to start a wash cycle. Once the cycle has begun the indicator light will remain lit in a fixed manner. To pause the wash cycle, press the button again; the indicator light will flash in an amber colour. If the 
symbol is not illuminated, the door may be opened. To start the wash cycle from the point at which it was interrupted, press the button again.
CHILD LOCK button 
: to activate the control panel lock, press and hold the button for approximately 2 seconds. When the symbol 
is illuminated, the control panel is locked. This means it is possible to prevent wash cycles from being modified accidentally, especially where there are children in the home. To deactivate the control panel lock, press and hold the button for approximately 2 seconds.
Standby mode
This washing machine, in compliance with new energy saving regulations, is fitted with an automatic standby system which is enabled after about 30 minutes if no activity is detected. Press the
4
