RICE COOKING PROCEDURE
1.Measure desired amount of rice on a level surface using the large 900 ml measuring cup provided. One cup of raw rice will yield approximately two cups of cooked rice.
2.In a separate container, rinse rice with warm water to remove excess bran and starch. This will protect the inner pot, prevent water from sputtering, and make cleaning up easier.
3.Put rinsed rice into the cooking pot and level out with rice paddle.
4.Add appropriate amount of water using the large 900 ml measuring cup. Refer to the Rice Water Measuring Guide on page 6 for the correct proportions of water and rice. The ratio of rice to water is 1:1 ¼. NEVER add water higher than the maximum water line.
5.Stir water and rice together with rice paddle to ensure all rice is evenly coated with water.
6.Set the unit on a stable surface, making sure there is no water or debris on the outside surface of the inner cooking pot. Place the inner cooking pot into the cooker. Make sure the pot has direct contact with the heating plate. If necessary shift left and right until pot is secure.
7.Close the lid. If the lid is not closed completely, the rice will not cook properly.
8.Plug AC cord into proper wall outlet. Do not plug cord in until ready to cook. The cooker will beep and the COOK light will flash.
9.Press the MODE button. The COOK light will turn on indicating the rice is starting to cook. When the cooking is finished, you will hear 5 beeps and the indicator light will automatically switch from COOK to WARM. At full capacity, approximate cooking time is 35 minutes.
6
