Aroma AWK-208BR Using Your Water Kettle, Before First Use, Boiling Water Cont, Helpful Hint

USING YOUR WATER KETTLE

BEFORE FIRST USE:

Before using for the first time, it is recommended to clean the interior of the kettle thoroughly. Please follow the procedure below before using the kettle:

1. Remove all packing materials and make sure that the product is received in good condition.

2. Taking care to keep the electrical components on the exterior of the kettle dry, wipe out the interior of the kettle with a damp, soapy cloth.

HELPFUL HINT:

•If your hand will not fit inside the kettle, swish warm, soapy water around the inside of the kettle with the lid closed. Rinse thoroughly with water.

3. Rinse out the inside of the kettle thoroughly with water.

4. With a damp cloth, gently wipe off the exterior of the kettle. Do not wipe off electrical components.

5. Dry all parts completely.

6. It is also recommended to run your kettle through one boiling cycle before using it to consume beverages. Following the instructions in “Boiling Water” below, boil one kettle of water. When water has boiled, pour it out and rinse the inside of the kettle once more.

7. Your kettle is now ready for use.

BOILING WATER:

1. Place the power base on a sturdy, level and heat-resistant surface.

2. Remove the lid and fill with water through lid opening. Do not fill past the “MAX” line on the interior of the kettle.

HELPFUL HINT:

•Use distilled water when possible for best taste and to minimize mineral build-up in the kettle.

NOTE:

•Never fill kettle with any liquid other than water. 3. Replace the lid so that it snaps securely into place.

4. Place the kettle onto the power base and plug the power cord into an available electrical outlet.

5. Push down on the POWER SWITCH to begin the boiling process. The indicator light will illuminate.

CONTINUED ON NEXT PAGE

USING YOUR WATER KETTLE

BOILING WATER (CONT.):

NOTE:

•Never open the lid while water is boiling.

•The stainless steel body will become extremely hot.

7. Once the water has boiled, the POWER SWITCH will flip up with an audible click. The indicator light will turn off, and the kettle will automatically shut off.

8. Lift the kettle off the power base before pouring, using the easy-grip handle. Take care not to touch the stainless steel body, as it will be hot.

9. After pouring, make sure the bottom of the kettle and the power base are dry before placing kettle on the power base.

10.When not in use, unplug the power base from the electrical outlet.

HOW TO CLEAN

1. Always unplug the electric kettle and allow it to cool completely before cleaning.

2. Wipe the exterior of the kettle with a clean, damp cloth, taking care to avoid electrical components. Use a soft cloth to dry.

3. To clean the interior of the kettle, use a soft sponge and soapy water to gently scrub.

HELPFUL HINT:

•If your hand will not fit inside the kettle, swish warm, soapy water around the inside of the kettle with the lid closed. Rinse thoroughly with water.

CAUTION:

•Never attempt to disassemble the kettle or power base. •Never immerse the kettle, cord, plug or power base in water.

Always take care not to allow electrical components to come into contact with water.

•Do not use abrasive cleaners or scouring pads of any kind on the kettle or power base. This will cause damage to the finish and may create a risk of electric shock.

4 5