WRS COMPONENTS
Wireless Zoom Unit 1 (WZU-1)
The WZU-1 is used to control zoom. Zoom speed can be adjusted and zoom limits can be easily set. The WZU-1 has the zoom knob in the best position for use with the WMU-1 or WMU-2.
Compatibility: The WZU-1 can be attached to any Wireless Main Unit (WMU-1, WMU-2, WMU-3) for wireless operation with any camera or to the Wired Handgrip Attachments WHA-2 or WHA-3 for wired operation with ARRICAM or 435 Xtreme. The WZU-1 can be placed between the Wireless Focus Unit and a Wireless Main Unit or Wired Handgrip Attachment, so focus, iris and zoom controls are together on one small and lightweight controller. The WZU-1 should not be placed between LDD-FP or WRC-1 and a Wireless Main Unit.
K2.52054.0 Wireless Zoom Unit 1
Wireless Expansion Bracket 3 (WEB-3)
With this bracket the WMU-3 can accept two hand controllers simultaneously, for example WFU and LDD-FP, or WFU and WRC-1.
Compatibility: For use with the Wireless Main Unit 3 (WMU-3) only. It is not possible to operate the WRC-1 and the Lens Data Display for Focus Puller (LDD-FP) on the same Wireless Main Unit. For wireless operation of WRC-1 and LDD-FP at the same time, two Wireless Main Units must be used. The same is true for two WRC-1 and LDD-FP units.
K2.52241.0 Wireless Expansion Bracket 3
Wireless Remote Control 1 (WRC-1)
The Wireless Remote Control WRC-1 allows for remote operation of all current ARRICAM and ARRIFLEX cameras. Its basic application includes the use as an extension of the camera display in setups where the camera is difficult to access. More sophisticated features are manual or programmed speed, shutter or iris ramps, speed change with exposure compensation through shutter and/or iris, and shutter changes with exposure compensation through iris (or vice versa) for a shift in depth-of-field. The WRC-1 can be operated wirelessly on the Wireless Main Units (WMU-1, WMU- 2, WMU-3) or hardwired with the Wired Handgrip Attachment (WHA-1, WHA-2, WHA-3).
Compatibility: For use on a Wireless Main Unit with the new radio modem (WMU-2, WMU-3), the WRC-1 should have at least software version 1.08. It is not possible to operate the WRC-1 and the Lens Data Display for Focus Puller (LDD-FP) on the same Wireless Main Unit. For wireless operation of WRC-1 and LDD-FP at the same time, two Wireless Main Units must be used. The same is true for two WRC-1 and LDD-FP units.
