W R S C O M P O N E N T S
Lens Data Display for Focus Puller (LDD-FP)
The LDD-FP is a small and lightweight display showing critical lens information and camera status. It can be configured to show focus scale, zoom scale, iris scale and camera status in any combination. Because of its small size it can be mounted in many ways, allowing the assistant to see precise lens and camera information while keeping an eye on the action. The screen of the LDD-FP is a high contrast Advanced TFT color screen with adjustable brightness.
Compatibility: The Lens Data Display for Focus Puller (LDD-FP) can be operated wirelessly with the Wireless Main Unit 3 (WMU-3). To use the LDD-FP on the WMU-3, compatible software is required for the LDD-FP, Studio Lens Data Box LDB-2, Lite Lens Data Box LDB-2 and FEM-2. The LDD-FP is not compatible with WMU-1, WMU-2, WHA-1, WHA-2 or WHA-3. It is not possible to operate the WRC-1 and the Lens Data Display for Focus Puller (LDD-FP) on the same Wireless Main Unit. For wireless operation of WRC-1 and LDD-FP at the same time, two Wireless Main Units must be used. The same is true for two WRC-1 and LDD-FP units.
K2.54163.0 Lens Data Display for the Focus Puller
Wireless Extension Unit 1 (WEU-1)
With this unit it is possible to connect the hand controllers to a Wireless Main Unit with a cable. It consists of the Wireless Main Attachment WMA-1, which mounts on the WMU, and the Wired Handgrip Attachment WHA-1, which accepts the hand con- trollers. Cable WC-E1 connects WMA-1 and WHA-1.
The Wired Handgrip Attachment 1 can be used separately to connect the WRC-1 with cable WC-W1 to all models of ARRIFLEX 235, 435, 535 or 16SR3.
Compatibility: When the WHA-1 is used to connect the WRC-1 to the CCU port of a 435 Xtreme, fast ramps and the minimum speed of 0.1fps are not accessible. The WHA-2 must be connected to the LCS port to access these features.
K2.52056.0 Wireless Extension Unit 1
Wired Handgrip Attachment 1 (WHA-1)
This handgrip attachment can be used to connect the Wireless Remote Control (WRC-1) with cable WC-W1 to all models of ARRIFLEX 235, 435, 535 or 16SR3.
Compatibility: When the WHA-1 is used to connect the WRC-1 to the CCU port of a 435 Xtreme, fast ramps and the minimum speed of 0.1fps are not accessible. The WHA-2 must be connected to the LCS port to access these features.