[RT] model
[R] model
[Basic] model
Model | G50R, G50RT | G35, G35R, G35RT | G25, G25R, G25RT |
Dimension(mm) | D220 / H320 / W460 | D220 / H360 / W360 | D220 / H280 / W360 |
Speaker(s) | 2 X 8 inch, 4ohm | 1 X 10 inch, 8ohm | 1 X 8 inch, 8ohm |
Output (RMS) | 50 watt | 35 watt | 25 watt |
Power consuption | 110 VA | 77 VA | 55 VA |
JACKS
1.FOOT SW. jack : Connects foot switch (push on / push off)(not include) to switching [DRIVE] channel to [NORMAL] channel
2.INPUT jack : Plug from your guitar here.
3.PHONES, REC jack : Connects earphones, using stereo 1/4" plug. Connects stereo or mono mini plug(1/4") for line out to the other amp or recorder.
4.AUX INPUT jack : Connects stereo mini plug(1/4") from music output of MP3, CDP or PC (Notice : Aux input jack can not work when guitar input jack is empty.)
DRIVE CHANNEL
1.CONTOUR : Adjust tone shape <
2.VOLUME : Adjust [DRIVE] channel volume.
3.GAIN : Distortion gain of [DRIVE] channel
4.LOW, HIGH : Adjust level of low frequency range and high frequency range.
NORMAL CHANNEL
1.CONTOUR : Adjust tone shape <
2.VOLUME : Adjust [NORMAL] channel volume.
3.BASS / MIDDLE / TREBLE : Adjust level of low, middle and high frequency range.
4.CHANNEL SELECT SWITCH : Select DRIVE channel and NORMAL channel (Notice : Foot switch is enable when DRIVE channel is selected)
REVERB FUNCTION
1.REVERB : Adjust level of reverb effect
2.TIME :Adjust duration tiom of reverb
TUNER FUNCTION
1. TUNER SWITCH : On/ off tuner function.
(Notice : Mute the output automatically when tuner is ON.)
POWER
1. POWER SWITCH : Switching the power on/off.
Make sure that the volume control is set to zero position before power on and off to reduce damage to amplifier and/or hearing ability
2 . AC INLET (Back panel) : Plug the AC power
3. FUSE HOLDER (Back panel) : Fuse for AC power
VOLTAGE | FUSE | ||
100V | ~ | 125V | 1A / 250V |
210V | ~ | 240V | 0.5A/250V |
