Operating your TV
Once you have connected your TV to an antenna or cable system, unplugged the TV in, and put
batteries in the remote, you are ready to use the TV. The first thing you should do is program your
TV so it memorizes all of the available channels.
Turning Your TV OnProgramming Your TV’s Channel Memory
Your TV’s memory determines the channels that are available using the ù CH ü buttons . If a
channel is not in memory, you can tune to it with the number buttons, but not with the ù CH ü
buttons. Follow these steps to program your TV’s memory:
1. With the TV on, press the MENU button twice, then the “Set-Up” menu will appear.
2. Use the ù CH ü buttons to select “Reception”, then use the ÿ VOL ÷ button to select “Air” or
“Cable”. If you connected an antenna to your TV, select “Air”; if you connected a cable system,
select “Cable”.
3. Use the ù CH ü buttons to select “Memorize Channels”, then use the ÿ VOL ÷ button to enter the
“Memorize Channels” process. Again press the ÿ VOL ÷ button to begin.
4. Press the MENU button to return to set up menu.
5. Press the MENU button three times to return to normal TV viewing.
Your TV’s channel memory will not be affected by a power outage. You will not need to re-program
the memory unless you change the type of cable or antenna connected to your TV.
10- Chapter 3: Operating your TV