1 2CD PLAYER TROUBLESHOOTING
Problem
Does not operate
No power to unit
Speakers not operating
Not all speakers
o p e r a t e
Blows fuses
CD skips too much
ERROR 1
ERROR 2
Possible Cause
No power to yellow or red wire; Inline fuse
b l o w n
Inline fuse blown
Speaker harness not connected
Incorrect splices or connections; Speaker wires
shorting to chassis ground or to each other
Power wire shorting to ground; Speaker wires
shorting to ground; Incorrect/too small a fuse
Receiver mount is not solid or backstrap is not
s e c u r e
The disc is not loading or ejecting properly
An error in the laser reading the disc Ejec
the disc,
Corrective Action
Check connection with test light; check vehicle
fuse with test light; Replace fuse
Replace fuse
Connect speaker harness; check speaker wires
Check all splices and connections; check splices
and insulate all bare wires
Make sure wire is not pinched; Install fuse of
correct rating
Check mounting and backstrap, and tighten if
i n e e d e d
Reload or press the Eject button; check the
condition of the disk or try another disk
Make sure it is clean, undamaged, and loaded
correctly; reload and check or try another disc
Visit www.asaelectronics.com for technical assistance
1 3WIRED REMOTE CONTROL (REMMS1500 OPTION)
Mounting Remote
The REMMS1500 comes with an aluminum mounting bracket that has 4 (four)notches cut
into it so the bracket can be broken away for different mounting depths.
Remote Operation
The REMMS1500 operation is the same as functions on the front panel of the MS1500
head unit.
See Pages 3-8 for detailed operation descriptions.
Volume Down
Volume Up
Power
Tune/Track Up
Tune/track Down
Mode
Band