ASA Electronics SRS1000 Front/Rear Panel Description (2)

Hi Level

Hi Level In

LRRR RF LF TV In

RadioTV

LRLSpeaker Out

Trigger

Line In SW2

SW1 RFRR

LR LF DC

Made in China

is a trademark of SRS Labs, Inc.

Rear panel description:

1. Radio, high level speaker input. Using the included 8 pin wire

harness, connect the speaker output of the radio to SRS1000.

Follow connection diagram on page 4. Do not use this input

simultaneously with Radio Line In.

2. TV In, High Level -- This input is to be used only with monaural

TV's (non-stereo) that do not have variable, stereo, line level out

put. If this input is used, no connection should be made to Line In,

TV. Doing so would cancel the SRS 3D effect.

3.Line in, TV--Connect to Stereo TV variable line level out put .

Do not connect any cable to the TV In ,Hi Level Jack if this input is

used .

4.Line in ,Radio--Connect to variable line output from radio (if

available). Do not connect the 8 pin harness to the SRS1000 if this

input is used.

5.Main Connection Input. Use included 16 pin wire harness to

apply power, TV mode trigger, and all speaker outputs though this

connection. Refer to page 4 for details.

Front/Rear Panel Description (2)

SRS1000 Theater Sound Owner's ManualSRS1000 Theater Sound Owner's Manual

----- 3 -----

Car Radio/Tape