Switch(Config)# interface 1
Switch(Interface 1)# ?
exit Exit current shell
dot1x Configure 802.1x mode
lacp Configure port LACP mode
addport Add one port to a LAG group
delport Remove a port from a LAG group
lldp Configure lldp port level settings
admin-mode Configure administrative mode on a port
auto-negotiate Configure auto-negotiate mode on a port
speed Configure port phy parameter
flow-control Configure port flow control
port-security Configure port security
qos Configure port-based QoS priority mapping
rate-limit Configure rate limit on a port
storm-control Configure storm control on a port
rmon-counter Configure RMON counter capability on a port
set Configure an IGMP router port
spanning-tree Configure port spanning-tree
vlan Configure VLAN properties on a port
interface Change to another interface
Switch(Interface 1)#
To exit interface configuration mode and return to global configuration mode, enter the exit command. To exit
configuration mode and return to top mode, use the exit command.
Enter a question mark (?) at the system prompt to display a list of commands available for each command mode. You
can also get a list of any command's associated keywords and arguments with the context-sensitive help feature.
29 Asante IC3724PWR User’s Manual