Troubleshooting Tips
In the unlikely event your network is not operating properly, follow the troubleshooting tips below.
■Check your power connection. Is the green Power LED on? If not, plug the power module into a different AC outlet.
■Check your network cable. Is the green network Link LED on? If not, try connecting a “known good”Ethernet network cable between your hub and the adapter.You should see a Link LED on your hub and your network adapter.
■The maximum distance from any node (computer, printer, hub, switch, etc.) is 328 feet or 100 meters. Be sure your Category 5 UTP cable is not coiled, twisted or damaged.When connecting the hub to a computer, be sure your cable is wired for
■Check your computer’s software. Check your operating system manual for instructions on configuring your network for file and print sharing.
Need more help?
Consult the Asanté website (www.asante.com) for additional troubleshooting tips and frequently asked questions (FAQ).You may also contact Asanté Technical
Support during standard business hours (7am to 6pm MST,
Email: support@asante.com
Phone:
FAX:
Product Specifications | Operating Environment | ||
Network: | Auto negotiation of IEEE 802u Fast Ethernet (100BaseTX) | Temperature: | |
| or IEEE 802.3 Ethernet (10BaseT) | Humidity: | |
|
| ||
Models: | FH416 – 16 port 10/100 dual speed Fast Ethernet switching |
|
|
| hub with |
|
|
| FS5016 – 16 port 10/100 Fast Ethernet switch with Auto- |
|
|
| Uplink, |
|
|
Error Protection: | Automatically isolates faulty ports |
|
|
| reconnection) |
|
|
Error Correction: | Automatic polarity detection and correction |
|
|
Expansion: | Auto MDI/MDIX (FH416 only) – Any port may be used |
|
|
| for uplink to additional hubs or switches with Asante |
|
|
|
|
| |
Power: | 12 VDC (AC power module included) |
|
|
Emissions: | FCC Class B, CE |
|
|
Safety and Regulatory Compliance
FCC Compliance Statement
This hardware device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: 1) this device may not cause harmful interference, and 2) this device must accept any interference received, including interference that may cause undesired operation.This equipment has been tested and found to comply with the limits for a Class A computing device in accordance with the specifications in Subpart B of Part 15 of FCC rules, which are designed to provide reasonable protection against such interference in a residential installation. However, there is no guarantee that interference will not occur in a particular installation. If you suspect this equipment is causing interference, turn your unit on and off while your radio or TV is showing interference, If the interference disappears when you turn the unit off and reappears when you turn the unit on, something in the unit is causing interference.You can try to correct the interference by one or more of the following measures: 1) reorient or relocate the receiving antenna; 2) increase the separation between the equipment and the receiver; 3) connect the equipment to an outlet on a circuit different from that to which the receiver is connected; 4) consult the place of purchase or an experienced radio/television technician for additional suggestions. Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
Safety Advisory
1.This product should be operated from the type of power source indicated on the marking label. If you are not sure of the type of power available, consult your dealer or local power company.
2.Do not allow anything to rest on the power cord. Do not locate this product where people will walk on the cord.
3.Never push objects of any kind into this product through cabinet slots as they may touch dangerous voltage points or short out parts that could result in a risk of fire or electric shock. Never spill liquid of any kind on the product.
4.Do not attempt to service this product yourself, as opening or removing covers may expose you to dangerous voltage points or other risks. Refer all servicing to service personnel.
FriendlyNET | Hubs & Switches |
FH416/FS5016 |
|
Tested To Comply
With FCC Standards
FOR HOME OR OFFICE USE
